Electric motor driven, burn fuel oils
SE100 Portable Forced Air Heater
The SE100 is a lightweight portable heater that efficiently runs on diesel, kerosene or kerosene based fuels. This afforable indirect fired heater produces 100% breathable forced air and can be used in a wide variety of applications from heating a garage to effectively drying concrete or pre-heating equipment on any industrial site.
This portable forced air heater is extremely popular in the North American in the helicopter and construction industries. Due to the small physical size of this portable heater as well as its huge BTU output, the SE100 has become a popular forced air heater choice in many remote corners of the world.
SPECIFICATIONS
Type of heater: 110 Volt Electric Plug In Indirect-Fired Portable
Dimensions: 49" long x 20" high x 30" wide
Unit weight, dry: 43 Kgs (95 lbs.)
Ventilating air output: 5000 lbs. per hour
Ventilating air supply pressure: 2.5cm (1") w.c. at discharge plenum.
Maximum temperature rise: 174 C (345 F)
Type temperature control: Optional thermostat control part #4E636
Fuel Consumption (280 F output): 0.81 gallons/hr. at 0 F ambient
Maximum heating capacity: 100,000 BTU/hr. at -65 F at sea level
Operating ambient range: -4°F to 120°F
Outlet air temperature range: 180-280 F (adjustable)
Rated airflow: 880 CFM at 0 in W.G.
Type of fuel: All diesel and kerosene plus kerosene based jet fuels
Fuel capacity: 11 gallons, self contained tank
Engine: Electric motor prime mover
One piece exhaust pipe: 5 3/4 inch diameter x 7.5 inches long
Flexible duct sizes: 12 inch diameter x 15 feet long (1 each)
Running gear: 7 1/2 inch rubber tires with handle bar, allows for easy movement. (Towing not recommended)
Low temperature starting requirements: Optional Heated fuel filter
Finish: Normally yellow